Bring in the Pies!

For production, fast re-flashing and testing of each JeeNode Zero is going to be a must. This week’s episode will be about speeding up the uploads, but also several ways to debug and test any STM32 board:

Let’s dive in - one article per day, as usual:

• Faster uploads through SPI - Wed
• Every possible connection - Thu
• Setting up the Pi software - Fri

The approach described here will work on any Raspberry Pi, even the very early “A” units with a 26-pin header & 256 MB RAM. A perfect way to put your old RasPi to use!