Looking for something?
function search(elt) { elt.q.value=elt.q.value+” site:jeelabs.org” } This is a list of “stuff” I’ve worked on over the years, in reverse chronological order: This site has changed shape a few times,...
View ArticleMeasuring with Disco-L053, part 2
The previous article mentioned that the “Disco-L053” board includes a complete current measuring circuit, which can handle a range of nearly six decades. So here is a brief description of how to...
View ArticleMeasuring current with Disco-L053
It turns out that there’s a nice way to measure current consumption with a commercial board by ST Microelectronics. It’s called the 32L0538-DISCOVERY, but for brevity and consistency I’m going to call...
View ArticleThe PlatformIO command line
Software development for embedded microcontrollers requires – as a minimum – 1) a text editor to enter and tweak source code, 2) a “toolchain” to compile and link the code into a firware image suitable...
View ArticleThe Mac is going downhill
Many years ago, I had an 11” MacBook Air. The tapered one. Bought it literally on a whim, accepting whatever model the store had available right then and there (4 GB RAM and 128 GB SSD), and took it...
View ArticleThe DAC and its DMA buddy
After yesterday’s article about ADC, it seems fitting to describe the other side of the coin: the digital-to-analog converter (DAC) and how to generate an analog waveform with it. DAC is easy This is...
View ArticleThe ADC and its watchdog
The STM32 L0-series and newer µCs have an interesting feature: the ADC “watchdog”. Some variants have more than one, in fact. This mechanism can keep track of analog voltages in the digital world,...
View ArticleLow-power L031 ... maybe
The exploration into low-power sleep modes continues. An STM32F103 draws just 3 µA in standby mode, but that’s not the end of the story. The STM32L0xx µCs are more modern and even lower-power. So I...
View ArticleCP/M on F407, part 6 - Finish
So now we have a running CP/M system, great. Except that it has no content, and no means to get any new content onto the virtual disk. That makes it pretty much useless. Intel HEX We need one more step...
View ArticleCP/M on F407, part 5 - Power up
It’s time to stop talkin’ and start walkin’ … Disk initialisation As mentioned in the previous article, the last step is about getting the virtual disk in flash formatted and set up correctly. But...
View ArticleCP/M on F407, part 4 - Booting
The last piece of the puzzle is to make all the parts line up and work together. This turns out to be quite involved. A large part is due to the “virtualness” of this whole CP/M setup: we need a way to...
View ArticleCP/M on F407, part 3 - The BIOS
As mentioned in the intro of this little CP/M series, the CP/M hardware abstraction layer is provided in a “BIOS”. This is a system-specific section of code which interfaces the main part of CP/M with...
View ArticleCP/M on F407, part 2 - Storage
CP/M is a disk operating system. It relies on one or more “disks” for permanent storage, which persists while the computer is off. At the time, 8” floppy drives had just started to become available, at...
View ArticleCP/M on F407, part 1 - Intro
CP/M from the 1970’s was an operating system for 8080 and Z80 8-bit micrcomputers. It was very popular among hobbyists, because it came at the right time and offered a way to manage data file storage...
View ArticleTurning a Black F407 into a Z80
This is an amalgamation of two recent articles: Turning a Blue Pill into a Z80 and Getting started with the F407. I want to use this as starting point for further retro Z80 explorations. The first goal...
View ArticleGetting started with the F407
The first thing to try out on every new board is to blink an LED: the embedded equivalent of writing a “Hello World” program. I’m going to do this for both the “DIYmore” and the “Black407” boards, as...
View ArticleRetrocomputing on STM32F407
The Blue Pill is a wonderful little board, and my first choice for many projects requiring a small and very low-cost µC board. Especially with PlatformIO’s excellent support for it. Even for...
View ArticleThe CAN bus, part 6 - Single-wire
There is a second way to use the CAN bus: in “single wire” mode (SW-CAN). But before I go into that, let me set up a dual-node bus, using standard MCP2551 transceivers for a “normal” CAN bus with...
View ArticleThe CAN bus, part 5 - Demo
Demo time! As test setup, I’m going to use an F4-based STM32 µC, since it has two CAN bus controllers. It’s easier to write a quick test for a single system. And since I have these boards lying around,...
View ArticleThe CAN bus, part 4 - JeeH API
Enough already of all this theory … it’s time to put the CAN bus into practice. Since my goal is not just to get CAN working, but also to fully explain how it can be implemented on an STM32 µC, I will...
View Article
